Gas turbine air intake filters forthe USAHoustonNew YorkLos Angelesthe USA

Industrial facilities across the United States operate in a wide range of environments, from power-generation sites and manufacturing facilities to coastal installations, oil and gas operations and commercial HVAC systems. Each application can require a different combination of filtration stages, media and filter construction.

Airguard Envirocare provides industrial air filters for US customers across gas turbine intake, industrial HVAC, marine, oil and gas, power generation and transport applications. The range includes standard, compatible replacement and bespoke filter solutions designed around equipment configuration, operating conditions and filtration requirements.

Industrial Air Filtration for US Applications

Different industrial environments place different demands on air filtration systems. Filter selection can depend on the equipment being protected, the operating environment, airflow requirements and the filtration stage required.

Gas Turbine Intake Filtration in the US

Gas turbine installations across the United States can encounter dust, moisture, salt aerosols and other airborne contaminants depending on location and operating environment. Properly staged intake filtration helps manage these contaminants before air reaches the turbine.

Airguard's range includes pre-pocket filters, high-efficiency pocket filters, industrial panel filters and coalescer panels for different gas turbine intake configurations.

High-Efficiency Pocket Filters

The T60-AG, LHF-AG, HXA-AG, HVX-AG, HVL-AG, HV3-AG and HV2-AG ranges provide high-efficiency filtration options for gas turbine intake systems.

The T60-AG, for example, is a direct compatible replacement for Freudenberg T60 and Parker Hannifin/Altair series filters and is suitable for both onshore and offshore turbine installations.

For US facilities operating in coastal or offshore environments, the HVL-AG and HV3-AG ranges are designed around conditions involving salt, moisture, humidity and high air velocities.

Pre-Pocket Filtration for Gas Turbine Systems

Pre-filtration is an important part of a staged turbine intake arrangement because it helps reduce the contaminant load reaching downstream high-efficiency filters.

Airguard supplies PFA-AG, PFAH-AG, PBRH-AG, PBR-AG and PB1-AG pre-pocket filters compatible with Altair System 2, Altair Neptune and Altair Vega configurations.

The PFA-AG, for example, is designed to handle coarse and medium particles, salt aerosols and moisture before the air reaches the next filtration stage.

For US power-generation and industrial sites, selecting the correct pre-filter configuration can help align the intake system with local environmental conditions and the requirements of the turbine installation.

Coalescer Panel Filters for Moisture Control

Moisture and liquid aerosols can create additional challenges for gas turbine and industrial air intake systems, particularly in coastal, marine and humid environments.

Airguard supplies TS1000-AG, PC2-AG, PC1-AG, PB1P8-AG, V99X-GT2-AG and GT2-AG coalescer panel filters for applications including gas turbine ventilation, engine intake, marine, offshore and industrial air systems.

The PC2-AG is designed as a compatible coalescer panel for Altair System 2, Neptune and Vega configurations, providing an additional filtration stage where moisture and liquid aerosols need to be managed.

Gas Turbine Filtration Options at a Glance

Industrial Panel and HVAC Filters

US commercial, industrial and manufacturing facilities require filtration solutions across air handling units, ventilation systems and other HVAC equipment.

Airguard supplies G3/G4 panel filters, F7 panel filters, F7 rigid bag filters and other pocket and bag configurations for these applications.

Standard and made-to-order sizes can be supplied to match existing dimensions, airflow requirements and filtration specifications. This makes the range suitable for both routine filter replacement programmes and applications where existing filter dimensions require a specific configuration.

Air Filtration for US Power Generation, Oil & Gas and Marine Applications

Power Generation

Power-generation facilities depend on reliable air filtration across gas turbine inlet systems, engine air intakes and supporting HVAC equipment.

Airguard supplies primary and secondary filtration stages, including industrial panel filters, pre-pocket filters, coalescer panels and high-efficiency pocket or bag filters.

For US power plants, filter selection can be based on turbine configuration, site environment, required filtration stage, airflow conditions and existing filter dimensions.

Oil & Gas

US oil and gas facilities can operate across environments where airborne dust, sand, fog, spray, industrial pollution and moisture place additional demands on air intake and HVAC filtration.

Airguard provides compatible and bespoke filtration solutions for gas turbines, ventilation systems, HVAC equipment and engine intake applications.

Filter construction and media selection can be matched to the operating environment, equipment requirements and existing installation.

Marine & Coastal Applications

Coastal and marine facilities face additional exposure to salt-laden air, moisture and airborne contaminants.

Airguard's HVL-AG, HV3-AG, PFA-AG and PC2-AG ranges provide filtration options for applications where salt aerosols and moisture are important considerations.

For US coastal installations, filter selection should take into account the local environment, intake configuration and required filtration stages.

Transport & Commercial HVAC

Air filtration is also required across US transport and commercial HVAC applications, including air-conditioning and ventilation systems.

Airguard supplies panel, pocket, rigid bag and V-cell filtration for AHUs and ventilation equipment, with standard and bespoke configurations available for different installation requirements.

Industrial Filter Replacement Solutions for US Buyers

Airguard Envirocare is a UK-based manufacturer and supplier of industrial air filtration products, with manufacturing and engineering operations in Wolverhampton. The company has manufactured air filtration solutions since 1985 and supplies products internationally.

For US customers replacing existing turbine or industrial filters, the focus is on matching the required specification rather than simply selecting a filter by name.

Compatible Filtration for Altair Systems

Airguard supplies compatible gas turbine intake filtration for Altair® / Parker® System 2, Vega, Neptune and Aquila configurations.

The range includes high-efficiency pocket filters, pre-pocket filters and coalescer panels designed around different turbine intake requirements.

Products such as HXA-AG, HVX-AG, HVL-AG, HV3-AG, PC2-AG and PB1P8-AG provide replacement options for compatible existing configurations.

Where a standard product does not meet the installation requirements, Airguard can also work from filter dimensions, drawings, equipment details or existing part references.

UK Manufacturing with Supply to the US

Airguard manufactures its filtration products in the UK and supports customers through an international distribution network. The company's market structure includes a dedicated United States presence alongside markets such as India, Indonesia, Vietnam, Thailand and Qatar.

For US customers, this provides access to UK-manufactured filtration products for power generation, oil and gas, marine, transport and commercial and industrial HVAC applications.

Built for Better Cost, Lead Time and Performance

For US EPC contractors, maintenance teams, procurement professionals and plant operators, choosing an industrial filter involves more than technical specification alone. Lead time, procurement cost, equipment compatibility, maintenance requirements and expected service life all affect the overall value of a replacement filtration solution.

Airguard focuses on these practical requirements alongside the technical needs of the application.

• Quick Lead Times: Responsive production and supply can help US EPC contractors plan filter procurement and replacement programmes more efficiently, particularly when replacement requirements are linked to scheduled maintenance.

• Competitive Pricing: Cost-effective filtration solutions can help EPC contractors manage project costs and protect margins while supporting efforts to reduce ongoing maintenance costs across individual sites.

• Specification-Matched Performance: Filters are manufactured around the required application, dimensions, airflow and filtration specification to provide a practical replacement aligned with the existing system requirements.

• Accurate Size and Fit: Consistent dimensions and configurations help US customers match replacement filters to existing housings and equipment, with made-to-order options available where standard sizes are not suitable.

• Durability and Service Life: Filter construction and materials are selected according to the intended operating environment, supporting dependable performance over the expected service period.

For US industrial buyers, this approach brings together technical compatibility, procurement efficiency and long-term operating considerations when selecting replacement or bespoke filtration solutions.

Need an Industrial Filter Replacement in the US?

Whether the requirement involves a turbine intake, HVAC installation or another industrial air filtration system, providing the existing filter details and operating requirements can help establish the appropriate replacement configuration.

Request a Quote →