+44 (0) 7777 100207sales@airguardenvirocare.com
Airguard Envirocare FSS-AG i an Altair® / Parker® y tem replacement indu trial panel filter compatible with Altair Sy tem 2, Altair Neptune and Altair Vega.
Brand
Airguard Envirocare
Flow Rate
0.25 – 0.79 m³/s (900 – 2,840 m³/h) at 1.5 – 2.5 m/s
Division
Filtration
Efficiency
n/a
Industry
Oil & Gas, Power Gen, Wind, HVAC
Temperature
upto 80°C
Application
Offshore, Land-based
Height
407 / 500 / 598 mm
Technology
Filtration
Width
407 / 500 / 598 mm
Product Type
Filter Panel
Depth
22 / 50 mm
Product Style
Coalescer Panel
OD
n/a
Media
Crimped Knitted Monofilament Stainless Steel Mesh, between welded or expanded SS mesh
ID
n/a
Construction
Stainless Steel 304L / 316L
Weight
2.5 KG or 5 lb
Classification
Class available on request
Bespoke
Available
Product
FSS-AG
Altair Systems
Altair Part Numbers
Gas Turbine Manufacturers
Environment
Industrial Sector
The Airguard Envirocare FSS-AG industrial panel filter uses a crimped stainless steel mesh core, enclosed in a robust stainless steel frame. As an OEM-equivalent, it matches the original filter’s dimensions, media specification, part number and mounting method for easy replacement, along with a 12-month manufacturer warranty
Stainless steel 304L and 316L frames provide corrosion resistance, with 316L suited to coastal, offshore and high-salt environments. Available in 22 mm and 50 mm depths, with custom sizes, clips, seals and drain holes. The knitted mesh core coalesces water droplets and salt aerosols, allowing moisture to drain before reaching the turbine or downstream filter. Fully stainless-steel construction prevents media carryover and is non-flammable.
Share part number/spec, dimensions, airflow and efficiency, and our team will respond within 24 hours.
From purchase order to delivery on site. Every FSS-AG is built, checked and shipped by our own team.
Common questions about FSS-AG.
Yes, the FSS-AG is easily cleaned using low-pressure cold water. If necessary, greasy contaminants can be removed by washing with non-ionic cleaning detergent and rinsing with fresh water. When cleaned correctly, the filter is restored to its original efficiency and pressure loss.
The FSS-AG is a direct replacement for Altair System 2, Altair Neptune and Altair Vega coalescer panels, cross-referencing to Parker Hannifin / Altair part numbers SMC/006496F, SMC/006507F, SMC/006593F, P2C-1-002, P2C-1-003 and P2C-1-004.
Clean the filter once pressure loss reaches 200 Pascals, rather than on a fixed schedule. Sites with heavy salt or moisture loading will reach this threshold faster than drier inland sites.
316L offers higher resistance to chloride corrosion than 304L, making it the better choice for coastal, offshore, or heavy salt-spray installations. 304L is a cost-effective option for less aggressive onshore environments.
The FSS-AG is an Airguard Envirocare OEM-equivalent filtration product listed as compatible with Altair System 2, Altair Neptune and Altair Vega air intake systems. It is intended for industrial filtration applications where compatibility with an existing system needs to be confirmed against the required specification.
Yes. Airguard Envirocare identifies the FSS-AG as an OEM-equivalent filter compatible with Altair System 2, Altair Neptune and Altair Vega. Compatibility should still be checked against the exact installed filter specification, dimensions, and performance requirements.
Yes. If you have an existing Altair®, Parker Hannifin, or other manufacturer part number, provide it together with the filter dimensions and specifications. Airguard Envirocare can use the available information to assess the appropriate OEM-equivalent replacement.
The published range information identifies the FSS-AG as compatible with Altair System 2, Neptune, and Vega. The exact application should be verified against the installed filter housing, dimensions, airflow, and performance requirements before replacement.
Airguard Envirocare offers specification matching and custom sizing across its filtration range. If your existing FSS-type filter has non-standard dimensions, provide a drawing, sample, or complete measurements for assessment.
Both products are listed as OEM-equivalent industrial filtration solutions compatible with Altair System 2, Neptune and Vega. The correct replacement should be selected using the original part number, filter dimensions, construction and required filtration performance.
FSS-AG should be selected according to the environmental conditions stated in its product specification, including factors such as dust, moisture, salt, humidity, temperature, and airborne contamination where applicable. The installed system and required filtration performance should be checked before selection.
Where FSS-AG is identified as Altair-compatible, Airguard Envirocare positions it as an OEM-equivalent or specification-matched replacement. Exact compatibility should be confirmed against the installed filter's part number, dimensions and required performance. The available product information identifies compatibility with Altair System 2, Altair Neptune and Altair Vega.
Yes. Airguard Envirocare can provide available technical information for FSS-AG, including technical datasheets, technical drawings and other relevant information on request.
The FSS-AG manufacturing origin is the United Kingdom.
Depending on the product, order requirements and delivery location, FSS-AG can be delivered in approximately 2 to 7 working weeks.
Use of an alternative filter should not be described as automatically voiding a gas turbine warranty. Warranty terms are set by the turbine OEM and the applicable contract, so customers should confirm the requirements with the OEM or operator before installation. Where this product is used as an OEM-equivalent replacement, its dimensions and performance specifications should be verified for the specific installation.
Yes. Airguard Envirocare offers a 12-month manufacturer's warranty for FSS-AG.
Explore other filter families that might suit your needs
The V85-AG is an industrial panel filter designed to deliver high filtration efficiency with low resistance. It provides a cost-effective Altair® / Parker® system replacement option for gas turbine and industrial air intake systems, including gas and diesel engines, HVAC and offshore wind turbines. Its cleanable design suits power generation and other applications where reliable filtration and consistent airflow matter, with a 12-month manufacturer warranty.
Airguard Envirocare FAL-AG is an OEM-equivalent industrial panel filter compatible with Altair System 2, Altair Neptune and Altair Vega. Designed for onshore and coastal gas turbine intake installations, it comes with a 12-month manufacturer warranty.
The V72-AG is a permanent, washable panel filter designed for gas turbine and industrial air intake systems where low resistance and easy cleaning matter. It is suitable for diesel and gas engine intake, HVAC, offshore wind turbine air intake. It is cost effective option for Altair® / Parker® system replacement and use as a washable first-stage or standalone filter, with a 12-month manufacturer warranty.
The Airguard Envirocare F97-AG is a bespoke, cleanable air filter for gas turbine ventilation, diesel and gas engine intake, HVAC and offshore wind turbine air intake systems. This industrial panel Filter is supplied with a 12-month manufacturer warranty.
Airguard Envirocare CP2-AG is an OEM-equivalent coalescer panel filter engineered for Altair System 2, Altair Neptune and Altair Vega air intake systems, offering a reliable replacement for equivalent OEM filters.
Airguard Envirocare T60-AG is an OEM-equivalent high-efficiency pocket filter, a direct compatible replacement for Freudenberg T60 and Parker Hannifin/Altair series filters. It operates as a gas turbine air intake filter across offshore and onshore turbine installations.
