+44 (0) 7777 100207sales@airguardenvirocare.com
Airguard Envirocare DSB8-AG i an OEM-equivalent pre-filter panel compatible with Altair Sy tem 2, Altair Neptune and Altair Vega.
Brand
Airguard Envirocare
Flow Rate
Available on request
Division
Filtration
Efficiency
G2
Industry
Oil & Gas, Power Gen, Marine, HVAC
Temperature
n/a
Application
Offshore, Coastal, Land-based
Height
To holding frame (same frames as final filters)
Technology
Mechanical Pre-Filtration (panel, retrofit stage)
Width
To holding frame (same frames as final filters)
Product Type
Filter Panel
Depth
22 mm
Product Style
Panel Pre-Filter, Cleanable, change on load
OD
n/a
Media
Synthetic, non-shedding
ID
n/a
Construction
Stainless Steel 304L / 316L frame
Weight
2.5 KG or 5 lb
Classification
G2 (EN779:2002)
Bespoke
Available
Product
FDSB8-AG
Altair Systems
Environment
The DSB8-AG pre-filter panel is designed to reduce the dust and particulate load reaching downstream high-efficiency filters. Acting as the first line of defence, it helps extend final-filter service life, reduce premature filter changes, and support reliable airflow through the gas turbine intake system.
With a slim depth of just 22 mm, the DSB8-AG can be installed with compatible pocket or panel filters without requiring significant additional housing space. It can be used as a standalone pre-filter or retrofitted to an existing filtration system where additional protection is required.
The DSB8-AG is engineered for integration with compatible Airguard Envirocare pocket and panel filters. Its bag-in-bag configuration allows the pre-filter and final filter to fit within the same holding frame arrangement, creating a compact and efficient multi-stage filtration solution.
The 22 mm panel depth minimises the additional space required and makes the FDSB8-AG suitable for retrofit installations across offshore, coastal and onshore gas turbine intake systems.
Share part number/spec, dimensions, airflow and efficiency, and our team will respond within 24 hours.
From purchase order to delivery on site. Every DSB8-AG is built, checked and shipped by our own team.
Common questions about DSB8-AG.
The FDSB8-AG is designed to integrate with compatible pocket and panel filters and can fit within the same holding-frame arrangement as the final filter. Existing frame dimensions and OEM part numbers should be checked before ordering.
Yes. Its slim 22 mm depth allows the FDSB8-AG to be retrofitted where additional pre-filtration is needed without adding significant depth to the existing gas turbine air intake system.
The FDSB8-AG captures dust and larger airborne particles before they reach the downstream high-efficiency filter. This helps reduce contaminant loading, extend final-filter service life, and improve filtration reliability in demanding environments.
The FDSB8-AG pre-filter panel is designed as an initial filtration stage for industrial air intake and ventilation systems. It helps capture larger airborne contaminants before the airflow reaches downstream filtration stages.
Yes. The FDSB8-AG can be incorporated into a multi-stage filtration arrangement, depending on the application, to provide pre-filtration before downstream coalescer panels, pocket filters or higher-efficiency filters.
Yes. The FDSB8-AG can be assessed as a replacement-by-specification filter using the existing filter part number, dimensions, frame depth, airflow and required filtration performance.
Yes. Send the existing OEM, Parker®, Altair® or other manufacturer part number with the filter dimensions and available technical specifications. Compatibility should be verified before a direct cross-reference is published.
Provide the existing part number, width, height, depth, frame construction, airflow, required efficiency and application details. A photograph or drawing can also help with technical matching.
The FDSB8-AG can act as a pre-filtration stage, helping reduce the particulate load reaching downstream filters. The complete filtration sequence should be selected according to the equipment design, environmental contamination, and required air quality.
The available product information indicates compatibility with Altair System 2, Neptune, and Vega.
FDSB8-AG should be selected according to the environmental conditions stated in its product specification, including factors such as dust, moisture, salt, humidity, temperature and airborne contamination where applicable. The installed system and required filtration performance should be checked before selection.
Where FDSB8-AG is identified as Altair-compatible, Airguard Envirocare positions it as an OEM-equivalent or specification-matched replacement. Exact compatibility should be confirmed against the installed filter's part number, dimensions and required performance. The available product information identifies Altair System 2, Neptune and Vega compatibility.
Yes. Airguard Envirocare can provide available technical information for FDSB8-AG, including technical datasheets, technical drawings and other relevant information on request.
The stated manufacturing origin is the United Kingdom.
Depending on the product, order requirements and delivery location, FDSB8-AG can be delivered in approximately 2 to 7 working weeks.
Use of an alternative filter should not be described as automatically voiding a gas turbine warranty. Warranty terms are set by the turbine OEM and the applicable contract, so customers should confirm the requirements with the OEM or operator before installation. Where this product is used as an OEM-equivalent replacement, its dimensions and performance specification should be verified for the specific installation.
Yes. Airguard Envirocare offers a 12-month manufacturer's warranty for FDSB8-AG.
Explore other filter families that might suit your needs
Airguard Envirocare PFAH-AG is an OEM-equivalent pre-pocket filter compatible with Altair System 2, Altair Neptune and Altair Vega, helping protect downstream high-efficiency filters from heavy dust loads.
Airguard Envirocare PFA-AG is an OEM (Altair® / Parker®) equivalent Pre-Pocket filter compatible with Altair System 2, Altair Neptune and Altair Vega. It operates as a gas turbine air intake pre-filter across onshore, offshore, marine and coastal turbine installations.
Airguard Envirocare PBRH-AG is an Altair® / Parker® equivalent Pre-Pocket filter compatible with Altair System 2, Altair Neptune and Altair Vega. It operates as a gas turbine air intake pre-filter across onshore, offshore and coastal turbine installations.
Airguard Envirocare PBR-AG is an OEM-equivalent pre-pocket filter compatible with Altair System 2, Altair Neptune and Altair Vega, helping protect the high-efficiency filter stage from larger dust and particles.
Airguard Envirocare PB1-AG is an OEM-equivalent pre-pocket filter compatible with Altair System 2, Altair Neptune and Altair Vega. It helps protect downstream high-efficiency filters in gas turbine air intake systems from dust, salt and other airborne contaminants.
Airguard Envirocare CP2-AG is an OEM-equivalent coalescer panel filter engineered for Altair System 2, Altair Neptune and Altair Vega air intake systems, offering a reliable replacement for equivalent OEM filters.
