+44 (0) 7777 100207sales@airguardenvirocare.com
The Airguard Envirocare F97-AG i a be poke, cleanable air filter for ga turbine ventilation, die el and ga engine intake.
Brand
Airguard Envirocare
Flow Rate
1,250 – 4,500 m³/h
Division
Filtration
Efficiency
EU2 – EU4 (Eurovent 4/5)
Industry
HVAC, Industrial
Temperature
Up to 80 °C
Application
Landbased
Height
302 / 498 / 597 mm
Technology
Self-charging Electrostatic Filtration
Width
302 / 498 / 597 mm
Product Type
Filter Panel
Depth
22 mm
Product Style
Electrostatic Cleanable Panel
OD
n/a
Media
Looped Polymer Filament Bed, between Woven Polymer Mesh
ID
n/a
Construction
Stainless Steel
Weight
2 KG or 4 lb
Classification
EU4 (Eurovent 4/5)
Bespoke
Available
Product
F97-AG
OEM System
Gas Turbine Manufacturers
Industrial Sector
The F97-AG is engineered with self-charging electrostatic polymer media to capture and retain fine dust while keeping pressure drop low. Its cleanable design helps reduce frequent filter replacement and ongoing filtration costs. As an OEM-equivalent replacement for Parker Hannifin filters, it is designed to fit existing housings without system changes, making it a practical choice for demanding industrial air filtration applications.
The filter has a three-stage construction. The first stage uses a woven, non-corrodable polymer mesh to stop larger particles. The middle stage contains special polymer filaments looped into thousands of indentations, where electrostatic activity is generated, followed by a repeat of the first-stage mesh.
The filter core is held in a robust stainless-steel frame, with full stainless-steel construction available for higher-corrosion environments. Adjoining clips and seals can also be supplied for multi-panel bank installations.
Filters are easily cleaned by:
Compressed air
Vacuuming
Washing in cold water (a non-ionic detergent may be used)
Share part number/spec, dimensions, airflow and efficiency, and our team will respond within 24 hours.
From purchase order to delivery on site. Every F97-AG is built, checked and shipped by our own team.
Common questions about F97-AG.
Use compressed air for routine cleaning, vacuuming for lighter dust loads, or wash in cold water with a non-ionic detergent for a deeper clean. Allow the F97-AG filter to dry fully before refitting.
No, it's manufactured by Airguard Envirocare as a direct OEM-equivalent replacement filter, cross-referenced to fit GE, Rolls Royce, Siemens, Solar Turbines, and Mitsubishi systems.
It's built to the same performance specification as branded alternatives such as those from Parker Hannifin. Still, as a UK manufacturer, Airguard Envirocare offers it at a lower unit cost with the same efficiency or build quality.
The F97-AG industrial air filter is designed for gas turbine ventilation, diesel and gas engine intake, industrial HVAC, and offshore wind turbine air intake systems. It is positioned as a bespoke filtration solution for demanding industrial applications.
Yes. Airguard Envirocare lists the F97-AG for gas turbine ventilation and air intake-related applications. The exact filter should be specified according to the installed housing, airflow, filtration requirements, and environmental conditions.
Yes. The published product range information lists the F97-AG for offshore wind turbine air intake applications alongside gas turbine, engine and HVAC uses.
The currently available source identifies the F97-AG as a bespoke air filter but does not expose a specific verified Altair® or Parker Hannifin part number for inclusion as a cross-reference. An existing OEM part number can instead be submitted for specification matching.
Yes. Because the F97-AG is positioned as a bespoke air filter, customers can submit dimensions, drawings, samples, airflow data and performance requirements for replacement matching or a custom build.
The F97-AG, V85-AG, and V72-AG are all listed for demanding applications including gas turbine ventilation, engine intake, HVAC, and offshore wind. Selection should be based on the specific filter construction and performance requirements rather than assuming the products are interchangeable.
F97-AG should be selected according to the environmental conditions stated in its product specification, including factors such as dust, moisture, salt, humidity, temperature, and airborne contamination where applicable. The installed system and required filtration performance should be checked before selection.
Where F97-AG is identified as Altair-compatible, Airguard Envirocare positions it as an OEM-equivalent or specification-matched replacement. Exact compatibility should be confirmed against the installed filter's part number, dimensions, and required performance. The available FAQ material does not identify a specific gas-turbine air intake system for this product; use it only where its published dimensions, airflow and filtration requirements match the installed system.
Yes. Airguard Envirocare can provide available technical information for F97-AG, including technical datasheets, technical drawings and other relevant information on request.
The F97-AG manufacturing origin is the United Kingdom
Depending on the product, order requirements and delivery location, F97-AG can be delivered in approximately 2 to 7 working weeks.
Use of an alternative filter should not be described as automatically voiding a gas turbine warranty. Warranty terms are set by the turbine OEM and the applicable contract, so customers should confirm the requirements with the OEM or operator before installation. Where this product is used as an OEM-equivalent replacement, its dimensions and performance specifications should be verified for the specific installation.
Yes. Airguard Envirocare offers a 12-month manufacturer's warranty for F97-AG.
Explore other filter families that might suit your needs
The V85-AG is an industrial panel filter designed to deliver high filtration efficiency with low resistance. It provides a cost-effective Altair® / Parker® system replacement option for gas turbine and industrial air intake systems, including gas and diesel engines, HVAC and offshore wind turbines. Its cleanable design suits power generation and other applications where reliable filtration and consistent airflow matter, with a 12-month manufacturer warranty.
The V72-AG is a permanent, washable panel filter designed for gas turbine and industrial air intake systems where low resistance and easy cleaning matter. It is suitable for diesel and gas engine intake, HVAC, offshore wind turbine air intake. It is cost effective option for Altair® / Parker® system replacement and use as a washable first-stage or standalone filter, with a 12-month manufacturer warranty.
Airguard Envirocare FSS-AG is an Altair® / Parker® system replacement industrial panel filter compatible with Altair System 2, Altair Neptune and Altair Vega. Designed for onshore and coastal gas turbine intake installations, it comes with a 12-month manufacturer warranty.
Airguard Envirocare FAL-AG is an OEM-equivalent industrial panel filter compatible with Altair System 2, Altair Neptune and Altair Vega. Designed for onshore and coastal gas turbine intake installations, it comes with a 12-month manufacturer warranty.
Airguard Envirocare CP2-AG is an OEM-equivalent coalescer panel filter engineered for Altair System 2, Altair Neptune and Altair Vega air intake systems, offering a reliable replacement for equivalent OEM filters.
Airguard Envirocare T60-AG is an OEM-equivalent high-efficiency pocket filter, a direct compatible replacement for Freudenberg T60 and Parker Hannifin/Altair series filters. It operates as a gas turbine air intake filter across offshore and onshore turbine installations.
