+44 (0) 7777 100207sales@airguardenvirocare.com
Airguard Envirocare PB1P-AG i an OEM-equivalent coale cer panel filter engineered for Altair Sy tem 2, Altair Neptune and Altair Vega application .
Brand
Airguard Envirocare
Flow Rate
Quoted at rated flow for the weather hood
Division
Filtration
Efficiency
G4
Industry
Oil & Gas, Power Gen, Marine, Wind, HVAC
Temperature
upto 80 °C
Application
Offshore, Marine, Land-based
Height
Made to measured holding frame
Technology
Coalescing and Mechanical Filtration
Width
Made to measured holding frame
Product Type
Filter Panel
Depth
22 / 50 mm
Product Style
V-Pleated Coalescer Panel, Cleanable
OD
n/a
Media
Polyester Mat, 100% Silicone-Free, between Plastic-Coated Support Mesh
ID
n/a
Construction
Stainless Steel Channel Frame; Plastic-Coated Support Mesh
Weight
2.5 KG or 5 lb
Classification
G4 / EU4 (EN 779:2002); 87% initial, 93% average arrestance; 99% at 5 µm
Bespoke
Available
Product
PB1P8-AG
Altair Systems
Altair Part Numbers
Gas Turbine Manufacturers
Environment
Industrial Sector
Airguard Envirocare designed the PB1P-AG coalescer panel for versatile use across air conditioning systems, general ventilation, machinery air intakes, and engine room filtration. Its role is to remove moisture and airborne contaminants efficiently, protecting the performance and lifespan of the equipment downstream. As a UK supplier and manufacturer, Airguard Envirocare can produce and dispatch the PB1P-AG faster and more cost-effectively than importing an OEM part, while matching it on materials, construction, and performance data.
The PB1P-AG uses a high-efficiency polyester mat pleated between two layers of plastic-coated wire mesh, providing rigidity and more filtering surface within a compact panel. The assembly sits in a robust stainless-steel frame, available in 22 mm standard or 50 mm extra depth to suit system pressure-drop and housing requirements, with adjoining clips and seals supplied for secure fitting into new or existing Altair-compatible housings.
Share part number/spec, dimensions, airflow and efficiency, and our team will respond within 24 hours.
From purchase order to delivery on site. Every PB1P-AG is built, checked and shipped by our own team.
Common questions about PB1P-AG.
It is rated G4 / EU4 under EN779:2002 and ASHRAE 52.2, with 99% efficiency up to 5 microns.
The PB1P8-AG is available in 22 mm standard depth and 50 mm extra depth, both rated G4 with different pressure-loss curves.
As a UK manufacturer, Airguard Envirocare builds the PB1P8-AG to the same material specification and performance standard as the original part, but with shorter lead times and lower cost, since there is no import markup involved.
The PB1P8-AG coalescer panel filter is designed for air conditioning systems, general ventilation, machinery air intakes and engine room filtration. Its coalescing design helps separate moisture and airborne contaminants from the intake air.
Yes. Airguard Envirocare lists the PB1P8-AG as an OEM-equivalent coalescer panel filter compatible with Altair System 2, Altair Neptune and Altair Vega.
The published PB1P8-AG specification describes a high-efficiency polyester mat positioned between layers of plastic-coated wire mesh and pleated into a corrugated structure, with the core retained in a stainless-steel frame.
The product information lists 100% silicone-free synthetic media and a G4 / EU4 classification, referencing EN779:2002 and ASHRAE 52.2.
The currently available PB1P8-AG product information confirms compatibility with Altair System 2, Neptune and Vega, but does not expose specific OEM part numbers for publication. If you have an existing Parker or Altair number, submit it for replacement matching.
Both are coalescer panel filters, but the final selection should be based on the existing air intake system, required filtration performance, dimensions and OEM specification. CP2-AG is also listed as compatible with Altair System 2, Neptune, Vega and other equivalent OEM systems.
PB1P8-AG should be selected according to the environmental conditions stated in its product specification, including factors such as dust, moisture, salt, humidity, temperature and airborne contamination where applicable. The installed system and required filtration performance should be checked before selection.
Where PB1P8-AG is identified as Altair-compatible, Airguard Envirocare positions it as an OEM-equivalent or specification-matched replacement. Exact compatibility should be confirmed against the installed filter's part number, dimensions and required performance. The available product information identifies compatibility with Altair System 2, Altair Neptune and Altair Vega.
Yes. Airguard Envirocare can provide available technical information for PB1P8-AG, including technical datasheets, technical drawings, and other relevant information on request.
The PB1P8-AG manufacturing origin is the United Kingdom.
Depending on the product, order requirements, and delivery location, PB1P8-AG can be delivered in approximately 2 to 7 working weeks.
Use of an alternative filter should not be described as automatically voiding a gas turbine warranty. Warranty terms are set by the turbine OEM and the applicable contract, so customers should confirm the requirements with the OEM or operator before installation. Where this product is used as an OEM-equivalent replacement, its dimensions and performance specifications should be verified for the specific installation.
Yes. Airguard Envirocare offers a 12-month manufacturer warranty for PB1P8-AG.
Explore other filter families that might suit your needs
Airguard Envirocare CP2-AG is an OEM-equivalent coalescer panel filter engineered for Altair System 2, Altair Neptune and Altair Vega air intake systems, offering a reliable replacement for equivalent OEM filters.
Airguard Envirocare PC2-AG provides an OEM-equivalent coalescer panel filter for Altair System 2, Altair Neptune, Altair Vega and other compatible air intake systems, helping protect intake systems from moisture and liquid aerosols.
Airguard Envirocare PC1-AG is an OEM-equivalent coalescer panel filter engineered for gas turbine ventilation, diesel and gas engine intake, HVAC, and offshore wind turbine air intake systems.
Airguard Envirocare SMC-AG Coalescer Panel Filter is built for demanding air intake environments where high airflow, moisture and harsh conditions can put pressure on filtration systems. Its permanent stainless-steel construction has no media carryover risk and keeps pressure loss low at high air velocities. Available in standard and custom sizes, with drain holes, adjoining clips and seals for secure installation.
Airguard Envirocare P2C-1-AG is a permanent, cleanable OEM-equivalent coalescer panel filter engineered for Altair® System 2 and Altair® Neptune air intake systems. Built with robust stainless-steel mesh construction, it provides a durable replacement solution for demanding offshore, coastal and industrial applications.
Airguard Envirocare V99XS-GT-AG is an OEM-equivalent coalescer panel filter designed for demanding gas turbine, marine, offshore wind and industrial air intake applications. It provides a reliable replacement solution for compatible Altair® and other OEM air intake systems.
