+44 (0) 7777 100207sales@airguardenvirocare.com
Airguard Envirocare DPGT-AG i a GE-equivalent indu trial panel filter for LM6000 ga turbine , engineered a a G4-rated pre-filter for on hore turbine in tallation .
Brand
Airguard Envirocare
Flow Rate
1,040 – 2,710 CFM (1,770 – 4,600 m³/h) by size
Division
Filtration
Efficiency
MERV 8
Industry
Power Generation (Gas Turbines), HVAC
Temperature
−40 to 70 °C (−40 to 158 °F)
Application
Landbased
Height
12 – 25 in nominal (592 mm metric build)
Technology
Mechanical Pleated Media Filtration
Width
20 – 25 in nominal (592 mm metric build)
Product Type
Filter Panel
Depth
95 / 89 mm
Product Style
Pleated Panel
OD
n/a
Media
100% Synthetic, Pleated, Non-Shedding
ID
n/a
Construction
Moisture-resistant beverage board double-wall frame; expanded metal support mesh; finger spacers on both faces
Weight
n/a
Classification
MERV 8; G4 (EN779); Class 2 (UL900)
Bespoke
Available (23 standard models listed)
Product
DPGT-AG
Gas Turbine Manufacturer
Environment
Industrial Sector
Airguard Envirocare DPGT-AG is a GE-equivalent industrial panel filter for LM6000 gas turbines, engineered as a G4-rated pre-filter for onshore turbine installations. Its pleated synthetic media helps handle dust and airborne particles while supporting steady airflow through the intake system. It comes with a 12-month manufacturer warranty.
The DPGT-AG Gas Turbine Pre-Filter is an OEM-equivalent G4 panel filter made with 100% synthetic pleated media. It is designed as a direct replacement for GE LM6000 gas turbine intake systems and comparable onshore turbine installations.
Its pleated design provides more media area than a flat panel, helping maintain lower resistance and higher dust-holding capacity before replacement. This can mean fewer filter changes and lower pressure-drop-related energy costs over the filter’s service life.
Share part number/spec, dimensions, airflow and efficiency, and our team will respond within 24 hours.
From purchase order to delivery on site. Every DPGT-AG is built, checked and shipped by our own team.
Common questions about DPGT-AG.
The DPGT-AG cross-references directly to DPGT-405G, GE LM6000 PN: 0423495, GE PN: 207D1202P0001, HBD/000619F, HBD/006204F, and HBD/006503F.
The DPGT-AG has a final resistance rating of 1.0" W.G. at its rated velocity of 625 FPM.
No, it's a synthetic pleated pre-filter designed for disposal at the end of its life. It is easily disposable by incineration, which keeps changeout time short compared with washable filters.
The DPGT-AG is built to the same G4 rating and dust-holding performance as comparable pleated pre-filters from suppliers like Parker Hannifin. Still, as a UK manufacturer, Airguard Envirocare offers it at a lower unit price without compromising on media quality or construction.
The DPGT-AG industrial panel filter is an OEM-equivalent filter listed by Airguard Envirocare as compatible with the GE LM6000 gas turbine. It is designed for industrial and power-generation applications where the replacement filter must match the existing air intake specification.
Yes. Airguard Envirocare specifically identifies the DPGT-AG as an OEM-equivalent industrial panel filter compatible with the LM6000 GE gas turbine. Before ordering, the existing filter specification and installation requirements should be checked to confirm the correct replacement configuration.
Yes. Send the existing GE or OEM filter part number, together with dimensions, frame depth, and any available drawing or technical specification. This information can be used for replacement matching and quotation.
For a DPGT-AG or GE LM6000 filter replacement, provide the existing part number, filter dimensions, airflow, required filtration efficiency and details of the operating environment. This helps ensure the replacement is matched to the correct application.
The currently available source specifically verifies compatibility with the GE LM6000 gas turbine, but does not expose additional OEM part numbers that should be published as verified cross-references. Those numbers should be added only after confirmation from the product specification or OEM documentation.
Airguard Envirocare offers specification matching and custom sizing for industrial filtration requirements. If your LM6000 installation uses a non-standard filter configuration, submit the drawing, dimensions and current specification for assessment.
DPGT-AG should be selected according to the environmental conditions stated in its product specification, including factors such as dust, moisture, salt, humidity, temperature, and airborne contamination where applicable. The installed system and required filtration performance should be checked before selection.
Where DPGT-AG is identified as Altair-compatible, Airguard Envirocare positions it as an OEM-equivalent or specification-matched replacement. Exact compatibility should be confirmed against the installed filter's part number, dimensions, and required performance. The available product information identifies compatibility with the GE LM6000 gas turbine.
Yes. Airguard Envirocare can provide available technical information for DPGT-AG, including technical datasheets, technical drawings, and other relevant information on request.
The DPGT-AG manufacturing origin is the United Kingdom.
Depending on the product, order requirements and delivery location, DPGT-AG can be delivered in approximately 2 to 7 working weeks.
Use of an alternative filter should not be described as automatically voiding a gas turbine warranty. Warranty terms are set by the turbine OEM and the applicable contract, so customers should confirm the requirements with the OEM or operator before installation. Where this product is used as an OEM-equivalent replacement, its dimensions and performance specifications should be verified for the specific installation.
Yes. Airguard Envirocare offers a 12-month manufacturer's warranty for DPGT-AG.
Explore other filter families that might suit your needs
The V85-AG is an industrial panel filter designed to deliver high filtration efficiency with low resistance. It provides a cost-effective Altair® / Parker® system replacement option for gas turbine and industrial air intake systems, including gas and diesel engines, HVAC and offshore wind turbines. Its cleanable design suits power generation and other applications where reliable filtration and consistent airflow matter, with a 12-month manufacturer warranty.
The V72-AG is a permanent, washable panel filter designed for gas turbine and industrial air intake systems where low resistance and easy cleaning matter. It is suitable for diesel and gas engine intake, HVAC, offshore wind turbine air intake. It is cost effective option for Altair® / Parker® system replacement and use as a washable first-stage or standalone filter, with a 12-month manufacturer warranty.
Airguard Envirocare FSS-AG is an Altair® / Parker® system replacement industrial panel filter compatible with Altair System 2, Altair Neptune and Altair Vega. Designed for onshore and coastal gas turbine intake installations, it comes with a 12-month manufacturer warranty.
Airguard Envirocare FAL-AG is an OEM-equivalent industrial panel filter compatible with Altair System 2, Altair Neptune and Altair Vega. Designed for onshore and coastal gas turbine intake installations, it comes with a 12-month manufacturer warranty.
The Airguard Envirocare F97-AG is a bespoke, cleanable air filter for gas turbine ventilation, diesel and gas engine intake, HVAC and offshore wind turbine air intake systems. This industrial panel Filter is supplied with a 12-month manufacturer warranty.
Airguard Envirocare CP2-AG is an OEM-equivalent coalescer panel filter engineered for Altair System 2, Altair Neptune and Altair Vega air intake systems, offering a reliable replacement for equivalent OEM filters.
