+44 (0) 7777 100207sales@airguardenvirocare.com
The V85-AG i an indu trial panel filter de igned to deliver high filtration efficiency with low re i tance.
Brand
Airguard Envirocare
Flow Rate
1250 - 4500 m³/h
Division
Filtration
Efficiency
EU2; 85% eff. at 5µ
Industry
HVAC, Industrial
Temperature
upto 80℃
Application
Landbased
Height
302 / 498 / 597 mm
Technology
Electrostatic Filtration
Width
302 / 498 / 597 mm
Product Type
Filter Panel
Depth
22 mm
Product Style
Pleated Electrostatic Panel
OD
n/a
Media
Polymer Filament, Woven Polythene
ID
n/a
Construction
Stainless Steel
Weight
2 KG or 4 lb
Classification
EN779 G2 / Eurovent 4/5 EU2
Bespoke
Available
Product
V85-AG
Altair Systems
Gas Turbine Manufacturers
Environment
Industrial Sector
The V85-AG uses dry polymer media with an electrostatic effect to capture fine dust that standard mesh filters may miss. This allows it to work as a standalone filter, not just a pre-filter, while maintaining low resistance. It is also designed to be cleaned and reused, helping reduce replacement costs over its service life.
The V85-AG uses layers of special polymer filament, looped to create thousands of tiny indentations where electrostatic activity develops as air passes through. The media is held between closely woven polythene mesh and pleated, plastic-coated supports, providing a large filtration surface.
The filter core is housed in a robust stainless-steel frame, with full stainless-steel construction available for demanding environments. Adjoining clips and seals can also be supplied for multi-panel installations.
When the filter needs cleaning, it can be:
Cleaned with compressed air
Vacuumed
Washed in cold water
Cleaned with a non-ionic detergent when required
Standard size (mm) | Airflow (m³/hr) | Pressure loss (Pa) |
302 x 302 | 1250 | 23 |
302 x 302 | 1600 | 37 |
302 x 302 | 2250 | 69 |
498 x 498 | 1750 | 22 |
498 x 498 | 2300 | 36 |
498 x 498 | 3000 | 59 |
597 x 597 | 2500 | 20 |
597 x 597 | 3200 | 32 |
597 x 597 | 4500 | 60 |
Share part number/spec, dimensions, airflow and efficiency, and our team will respond within 24 hours.
From purchase order to delivery on site. Every V85-AG is built, checked and shipped by our own team.
Common questions about V85-AG .
V85 Industrial Panel Filter uses dry polymer media that generate electrostatic activity as air passes through
These filters are cleanable by compressed air, vacuuming, or washing in cold water.
No, the media is unaffected by humidity so that it can be washed and put back into service without any loss of filtration performance.
Air passing through the dry polymer media generates an electrostatic charge, which actively attracts and holds fine dust, giving it 85% efficiency at 5 microns, well above a plain woven mesh screen filter.
V85-AG can be used as both. Its higher efficiency means it can be used on its own in many applications, or as a pre-filter ahead of finer downstream filtration where required.
The V85-AG industrial panel filter is designed for demanding air intake applications, including gas turbine ventilation, diesel and gas engine intake, industrial HVAC and offshore wind turbine air intake systems. It can be specified for replacement projects or bespoke filtration requirements based on the existing filter dimensions and operating conditions.
Yes. The V85-AG gas turbine filter is part of Airguard Envirocare's industrial filtration range for gas turbine ventilation and air intake applications. To match a replacement correctly, provide the existing part number, dimensions, airflow, filter efficiency and installation details.
The V85-AG is listed for offshore wind turbine air intake applications and is part of Airguard Envirocare's industrial filtration range serving demanding sectors including oil & gas and power generation. The final construction and specification should be matched to the environmental conditions, airflow and equipment requirements.
For accurate V85-AG filter replacement matching, provide the existing OEM or manufacturer part number, filter dimensions, frame depth, airflow rate, required efficiency and details of the operating environment. Airguard Envirocare uses these specifications to identify the appropriate filter family or bespoke replacement.
Yes. The V85-AG is positioned as a bespoke industrial air filter, making specification matching and custom sizing relevant where a standard replacement size is not suitable. Provide the existing filter drawing or physical dimensions for assessment.
The V85-AG, V72-AG and F97-AG all sit within Airguard Envirocare's industrial air filtration range for applications such as gas turbine ventilation, engine intake, HVAC and offshore wind systems. The correct choice should be based on the existing filter specification, required performance, dimensions and operating environment rather than product name alone.
V85-AG should be selected according to the environmental conditions stated in its product specification, including factors such as dust, moisture, salt, humidity, temperature, and airborne contamination where applicable. The installed system and required filtration performance should be checked before selection. V85-AG is the Altair equivalent filter specification, which is used by these air intake systems: Altair System 2, Altair Vega, Altair Neptune, and Altair Aquila.
V85-AG should be selected according to the environmental conditions stated in its product specification, including factors such as dust, moisture, salt, humidity, temperature, and airborne contamination where applicable. The installed system and required filtration performance should be checked before selection.
The Airguard Envirocare's V85-AG is a cleanable industrial panel filter built to the same core specifications as Altair® gas turbine intake filters. It delivers 85% efficiency at 5µm (EN779 G2/EU2) with a dry electrostatic polymer media and durable stainless steel frame. It is designed to fit Altair filter housings (Neptune, Vega, Aquila systems). The V85-AG offers performance comparable to the original, plus benefits such as reusability, UK manufacture, and a 12‑month warranty.
Yes. Airguard Envirocare can provide available technical information for V85-AG, including technical datasheets, technical drawings and other relevant information on request.
The V85-AG manufacturing origin is the United Kingdom.
Depending on the product, order requirements, and delivery location, V85-AG can be delivered in approximately 2 to 7 working weeks.
Use of an alternative filter should not be described as automatically voiding a gas turbine warranty. Warranty terms are set by the turbine OEM and the applicable contract, so customers should confirm the requirements with the OEM or operator before installation. Where this product is used as an Altair replacement, its dimensions and performance specifications should be verified for the specific installation.
Yes. Airguard Envirocare offers a 12-month manufacturer warranty for V85-AG.
Explore other filter families that might suit your needs
Airguard Envirocare FSS-AG is an Altair® / Parker® system replacement industrial panel filter compatible with Altair System 2, Altair Neptune and Altair Vega. Designed for onshore and coastal gas turbine intake installations, it comes with a 12-month manufacturer warranty.
Airguard Envirocare FAL-AG is an OEM-equivalent industrial panel filter compatible with Altair System 2, Altair Neptune and Altair Vega. Designed for onshore and coastal gas turbine intake installations, it comes with a 12-month manufacturer warranty.
The V72-AG is a permanent, washable panel filter designed for gas turbine and industrial air intake systems where low resistance and easy cleaning matter. It is suitable for diesel and gas engine intake, HVAC, offshore wind turbine air intake. It is cost effective option for Altair® / Parker® system replacement and use as a washable first-stage or standalone filter, with a 12-month manufacturer warranty.
The Airguard Envirocare F97-AG is a bespoke, cleanable air filter for gas turbine ventilation, diesel and gas engine intake, HVAC and offshore wind turbine air intake systems. This industrial panel Filter is supplied with a 12-month manufacturer warranty.
Airguard Envirocare CP2-AG is an OEM-equivalent coalescer panel filter engineered for Altair System 2, Altair Neptune and Altair Vega air intake systems, offering a reliable replacement for equivalent OEM filters.
Airguard Envirocare T60-AG is an OEM-equivalent high-efficiency pocket filter, a direct compatible replacement for Freudenberg T60 and Parker Hannifin/Altair series filters. It operates as a gas turbine air intake filter across offshore and onshore turbine installations.
