+44 (0) 7777 100207sales@airguardenvirocare.com
Airguard Envirocare V99XS-GT-AG i an OEM-equivalent coale cer panel filter de igned for demanding ga turbine, marine.
Brand
Airguard Envirocare
Flow Rate
1,750 – 5,000 m³/h (by face size)
Division
Filtration
Efficiency
G4
Industry
Oil & Gas, Power Gen, Marine, Wind, HVAC
Temperature
upto 80°C
Application
Offshore, Marine, Land-based
Height
597 / 498 mm
Technology
Coalescing and Mechanical Filtration
Width
597 / 498 mm
Product Type
Filter Panel
Depth
22 / 50 mm
Product Style
V-Pleated Coalescer Panel, Cleanable
OD
n/a
Media
Polyester Mat, 100% Silicone-Free, between Stainless Steel Wire Mesh
ID
n/a
Construction
Stainless Steel Frame and Support Mesh
Weight
2 KG or 4 lb
Classification
G4 / EU4 (EN 779:2002); 87% initial, 93% average arrestance; 99% at 5 µm
Bespoke
Available
Industrial Sector
The V99XS-GT-AG was developed for gas turbine air intake filtration, where protection from airborne dust and liquid water droplets is essential for reliable equipment operation.
Its coalescing design helps remove water droplets while also capturing particulate contamination. This makes the filter suitable for environments where moisture, salt-laden air and airborne contaminants can affect turbine and engine performance.
The V99XS-GT-AG is compatible with a range of OEM systems, including Altair® System 2, Neptune, Vega and Aquila, as well as compatible Airfil GT2, Veotec CP2, Wozair CP2 and Sterling Thermal filter installations.
Airguard Envirocare manufactures OEM-equivalent filtration solutions to match the required form, fit and performance specification, with standard and non-standard sizes available for replacement and bespoke applications.
The V99XS-GT-AG uses a high-efficiency polyester filter mat positioned between two layers of stainless-steel wire mesh. The filter media is pleated into a corrugated V-profile to increase the effective filtration area and improve structural rigidity.
The pleated filter core is retained inside a robust stainless-steel frame available in 22 mm or 50 mm depths. Standard and non-standard sizes can be supplied, together with adjoining clips and seals for installation into compatible air intake housings.
Share part number/spec, dimensions, airflow and efficiency, and our team will respond within 24 hours.
From purchase order to delivery on site. Every V99XS–GT–AG is built, checked and shipped by our own team.
Common questions about V99XS–GT–AG.
The V99XS-GT-AG is used in gas turbine and industrial air intake systems to help remove airborne dust and coalesce water droplets before the air reaches downstream equipment.
It is designed as an OEM-equivalent replacement for compatible Altair® System 2, Neptune, Vega, and Aquila systems, as well as selected Airfil GT2, Veotec CP2, Wozair CP2, and Sterling Thermal applications.
Yes. Airguard Envirocare can supply standard and non-standard sizes, subject to the required dimensions, frame depth, and application specification.
The V99XS-AG, also presented in the Airguard range as V99XS-GT-AG, is an OEM-equivalent coalescer panel filter compatible with Altair System 2, Altair Neptune, Altair Vega and other equivalent OEM air intake systems.
Yes. The V99XS-AG is part of Airguard Envirocare's coalescer panel range for demanding industrial air intake applications, including systems requiring compatibility with Altair-type installations.
The published range information identifies compatibility with Altair System 2, Neptune and Vega, as well as other equivalent OEM air intake systems where the specification matches.
The available product-range source confirms OEM-system compatibility but does not expose a verified V99XS-specific part-number list. Existing OEM part numbers should be checked against the individual product specification before adding them to the page.
Yes. Provide the current part number, dimensions, frame depth, airflow and filtration requirements. This allows Airguard Envirocare to assess the correct OEM-equivalent or specification-matched replacement.
Both products belong to the coalescer panel range, but the V99X-GT-AG is additionally listed as compatible with OEM systems from Airfil, Veotec, Wozair and Sterling Thermal, while the V99XS-AG is positioned around Altair and equivalent OEM systems.
The available product information identifies compatibility with Altair System 2, Altair Neptune, Altair Vega and equivalent OEM air intake systems.
V99XS-AG should be selected according to the environmental conditions stated in its product specification, including factors such as dust, moisture, salt, humidity, temperature and airborne contamination where applicable. The installed system and required filtration performance should be checked before selection.
Where V99XS-AG is identified as Altair-compatible, Airguard Envirocare positions it as an OEM-equivalent or specification-matched replacement. Exact compatibility should be confirmed against the installed filter's part number, dimensions and required performance. The available product information identifies compatibility with Altair System 2, Altair Neptune, Altair Vega and equivalent OEM air intake systems.
Yes. Airguard Envirocare can provide available technical information for V99XS-AG, including technical datasheets, technical drawings and other relevant information on request.
The V99XS-GT-AG manufacturing origin is the United Kingdom.
Depending on the product, order requirements and delivery location, V99XS-AG can be delivered in approximately 2 to 7 working weeks.
Use of an alternative filter should not be described as automatically voiding a gas turbine warranty. Warranty terms are set by the turbine OEM and the applicable contract, so customers should confirm the requirements with the OEM or operator before installation. Where this product is used as an OEM-equivalent replacement, its dimensions and performance specifications should be verified for the specific installation.
Yes. Airguard Envirocare offers a 12-month manufacturer's warranty for V99XS-AG.
Explore other filter families that might suit your needs
Airguard Envirocare CP2-AG is an OEM-equivalent coalescer panel filter engineered for Altair System 2, Altair Neptune and Altair Vega air intake systems, offering a reliable replacement for equivalent OEM filters.
Airguard Envirocare PC2-AG provides an OEM-equivalent coalescer panel filter for Altair System 2, Altair Neptune, Altair Vega and other compatible air intake systems, helping protect intake systems from moisture and liquid aerosols.
Airguard Envirocare PC1-AG is an OEM-equivalent coalescer panel filter engineered for gas turbine ventilation, diesel and gas engine intake, HVAC, and offshore wind turbine air intake systems.
Airguard Envirocare PB1P-AG is an OEM-equivalent coalescer panel filter engineered for Altair System 2, Altair Neptune and Altair Vega applications, helping protect air intake systems from moisture and liquid aerosols.
Airguard Envirocare SMC-AG Coalescer Panel Filter is built for demanding air intake environments where high airflow, moisture and harsh conditions can put pressure on filtration systems. Its permanent stainless-steel construction has no media carryover risk and keeps pressure loss low at high air velocities. Available in standard and custom sizes, with drain holes, adjoining clips and seals for secure installation.
Airguard Envirocare P2C-1-AG is a permanent, cleanable OEM-equivalent coalescer panel filter engineered for Altair® System 2 and Altair® Neptune air intake systems. Built with robust stainless-steel mesh construction, it provides a durable replacement solution for demanding offshore, coastal and industrial applications.
