+44 (0) 7777 100207sales@airguardenvirocare.com
Airguard Envirocare P2C-1-AG i a permanent, cleanable OEM-equivalent coale cer panel filter engineered for Altair® Sy tem 2 and Altair® Neptune air intake y tem .
Brand
Airguard Envirocare
Flow Rate
0.25 – 0.79 m³/s (900 – 2,840 m³/h) at 1.5 – 2.5 m/s
Division
Filtration
Efficiency
Mesh grade
Industry
Oil & Gas, Power Gen, Marine, Wind, HVAC
Temperature
upto 80 °C
Application
Offshore, Land-based
Height
407 / 500 / 598 mm
Technology
Mechanical/inertial capture and coalescing (knitted metal mesh)
Width
407 / 500 / 598 mm
Product Type
Filter Panel
Depth
20 or 50 mm
Product Style
Knitted Mesh Panel, Cleanable
OD
n/a
Media
Crimped Knitted Monofilament Stainless Steel Mesh, between welded or expanded SS mesh
ID
n/a
Construction
Stainless Steel 304L / 316L
Weight
2.5 KG or 5 lb
Classification
Mesh grade
Bespoke
Available
Product
P2C-1-AG
Altair Systems
Altair Part Numbers
Gas Turbine Manufacturers
Environment
Industrial Sector
The P2C-1-AG is a permanent industrial coalescer panel filter designed to protect gas turbines, wind turbines, diesel engines, gas engines, and industrial HVAC air intake systems operating in demanding environments.
Unlike disposable media filters, the P2C-1-AG uses a core of crimped, knitted monofilament stainless-steel mesh. This gives the filter a robust, reusable construction with no risk of media carryover. The permanent design allows the filter to be cleaned and returned to service, helping reduce replacement frequency and ongoing filtration costs.
As an OEM-equivalent replacement, the P2C-1-AG is compatible with Altair® System 2 and Altair® Neptune installations and can be matched to several existing OEM part numbers. It is particularly suited to offshore, onshore and coastal environments where moisture, airborne contamination and corrosion resistance are important considerations.
The P2C-1-AG features crimped, knitted monofilament stainless-steel mesh retained between layers of welded or expanded stainless-steel mesh. This creates a strong, stable filter core designed to withstand industrial airflow conditions.
The assembly is housed in a stainless-steel frame available in either 304L or 316L stainless steel. For offshore, marine and coastal environments with increased salt exposure, 316L can provide enhanced corrosion resistance.
The filter is available in 22 mm and 50 mm depths, with standard and non-standard sizes available. Drain holes, adjoining clips and seals can also be supplied to support secure installation in existing air intake housings.
Share part number/spec, dimensions, airflow and efficiency, and our team will respond within 24 hours.
From purchase order to delivery on site. Every P2C-1-AG is built, checked and shipped by our own team.
Common questions about P2C-1-AG.
Yes. The P2C-1-AG is designed as an OEM-equivalent replacement for compatible Altair® System 2 and Altair® Neptune air intake systems. Airguard Envirocare can also match the filter against existing OEM part numbers and dimensions.
Yes. Its permanent stainless-steel mesh construction allows the filter to be cleaned and returned to service, helping reduce disposable filter waste and replacement costs.
The P2C-1-AG is suitable for offshore, onshore and coastal applications, including gas turbines, wind turbines, marine systems, engines and industrial air intake equipment.
The P2C-1-AG is an OEM-equivalent coalescer panel filter listed for compatibility with Altair System 2, Altair Neptune, and Altair Vega air intake systems.
Yes. Airguard Envirocare positions the P2C-1-AG as an OEM-equivalent replacement for compatible Altair System 2, Neptune and Vega applications. The exact replacement should be confirmed against the existing specification.
For accurate replacement matching, submit the existing OEM part number, dimensions, filter depth, and airflow requirement. The available product information confirms Altair compatibility, but the specific P2C-1-AG page should be used to verify any part-number cross-reference before publication.
The P2C-1-AG belongs to Airguard Envirocare's coalescer panel range serving industrial air intake systems. Suitability for a particular gas turbine, engine or HVAC installation should be confirmed against the exact filter specification.
Airguard Envirocare supports specification matching and custom filtration requirements. Provide the existing filter dimensions or technical drawing to assess the correct replacement configuration.
Both products are associated with Altair-compatible coalescer filtration, but the SMC-AG is specifically described as a permanent, cleanable stainless-steel filter. The P2C-1-AG should be selected according to its own required construction and installed-system specification.
P2C-1-AG should be selected according to the environmental conditions stated in its product specification, including factors such as dust, moisture, salt, humidity, temperature and airborne contamination where applicable. The installed system and required filtration performance should be checked before selection.
Where P2C-1-AG is identified as Altair-compatible, Airguard Envirocare positions it as an OEM-equivalent or specification-matched replacement. Exact compatibility should be confirmed against the installed filter's part number, dimensions and required performance. The available product information identifies compatibility with Altair System 2, Altair Neptune and Altair Vega.
Yes. Airguard Envirocare can provide available technical information for P2C-1-AG, including technical datasheets, technical drawings and other relevant information on request.
The P2C-1-AG manufacturing origin is the United Kingdom.
Depending on the product, order requirements and delivery location, P2C-1-AG can be delivered in approximately 2 to 7 working weeks.
Use of an alternative filter should not be described as automatically voiding a gas turbine warranty. Warranty terms are set by the turbine OEM and the applicable contract, so customers should confirm the requirements with the OEM or operator before installation. Where this product is used as an OEM-equivalent replacement, its dimensions and performance specification should be verified for the specific installation.
Yes. Airguard Envirocare offers a 12-month manufacturer warranty for P2C-1-AG.
Explore other filter families that might suit your needs
Airguard Envirocare CP2-AG is an OEM-equivalent coalescer panel filter engineered for Altair System 2, Altair Neptune and Altair Vega air intake systems, offering a reliable replacement for equivalent OEM filters.
Airguard Envirocare PC2-AG provides an OEM-equivalent coalescer panel filter for Altair System 2, Altair Neptune, Altair Vega and other compatible air intake systems, helping protect intake systems from moisture and liquid aerosols.
Airguard Envirocare PC1-AG is an OEM-equivalent coalescer panel filter engineered for gas turbine ventilation, diesel and gas engine intake, HVAC, and offshore wind turbine air intake systems.
Airguard Envirocare PB1P-AG is an OEM-equivalent coalescer panel filter engineered for Altair System 2, Altair Neptune and Altair Vega applications, helping protect air intake systems from moisture and liquid aerosols.
Airguard Envirocare SMC-AG Coalescer Panel Filter is built for demanding air intake environments where high airflow, moisture and harsh conditions can put pressure on filtration systems. Its permanent stainless-steel construction has no media carryover risk and keeps pressure loss low at high air velocities. Available in standard and custom sizes, with drain holes, adjoining clips and seals for secure installation.
Airguard Envirocare V99XS-GT-AG is an OEM-equivalent coalescer panel filter designed for demanding gas turbine, marine, offshore wind and industrial air intake applications. It provides a reliable replacement solution for compatible Altair® and other OEM air intake systems.
