+44 (0) 7777 100207sales@airguardenvirocare.com
Cross-references to Altair part number K0840 also used in V99XS–GT–AG, V99X–GT2–AG
Airguard Envirocare CP2-AG i an OEM-equivalent coale cer panel filter engineered for Altair Sy tem 2, Altair Neptune and Altair Vega air intake y tem .
Brand
Airguard Envirocare
Flow Rate
9 m/s (1771 FPM)
Division
Filtration
Efficiency
G4
Industry
Oil & Gas, Power Gen, Marine, Wind, HVAC
Temperature
upto 80 °C
Application
Offshore, Marine, Land-based
Height
Standard and non-standard
Technology
Coalescing and Mechanical Filtration
Width
Standard and non-standard
Product Type
Filter Panel
Depth
22 / 50 mm
Product Style
V-Pleated Coalescer Panel, Cleanable
OD
n/a
Media
Polyester Mat, 100% Silicone-Free, between Plastic-Coated Wire Mesh
ID
n/a
Construction
Stainless Steel Frame; Plastic-Coated Wire Mesh
Weight
2.5 KG or 5 lb
Classification
G4 / EU4 (EN 779:2002); 87% initial, 93% average arrestance; 99% at 5 µm
Bespoke
Available
Industrial Sector
The CP2-AG Coalescer Panel Filter is engineered for offshore, marine and power generation applications, removing moisture, salt mist and liquid aerosols from gas turbine intake air. It provides an OEM-equivalent Altair replacement for demanding environments, including offshore oil and gas, marine propulsion and offshore wind applications.
The CP2-AG uses high-efficiency polyester media between plastic-coated wire mesh in a V-pleat design, providing more filter area, low pressure drop and strong salt-aerosol coalescing performance. Its stainless-steel frame comes in 22 mm or 50 mm depths, with standard and custom sizes, adjoining clips and seals available, and SRS technology for added turbine blade corrosion protection.
Share part number/spec, dimensions, airflow and efficiency, and our team will respond within 24 hours.
From purchase order to delivery on site. Every CP2–AG is built, checked and shipped by our own team.
Common questions about CP2–AG.
The CP2-AG removes moisture, salt mist and liquid aerosols from gas turbine intake air. It is designed for offshore, marine, and power generation applications.
Yes. The CP2-AG is an OEM-equivalent replacement for Altair System 2, Altair Neptune and Altair Vega air intake systems, with standard and custom sizes available.
The CP2-AG is designed for demanding environments such as offshore oil and gas, marine propulsion and offshore wind applications, where moisture and salt aerosols can affect turbine components.
The CP2-AG is an OEM-equivalent coalescer panel filter compatible with Altair System 2, Altair Neptune, Altair Vega, and other equivalent OEM air intake systems.
Yes. Airguard Envirocare lists the CP2-AG as an OEM-equivalent replacement for compatible Altair System 2, Neptune and Vega air intake systems.
The CP2-AG belongs to Airguard Envirocare's coalescer panel range used across demanding industrial sectors, including power generation, marine, oil & gas and industrial air intake applications. The final application should be matched to the exact system requirements.
Yes. Submit the existing OEM or manufacturer part number, along with dimensions, airflow, frame depth and filtration requirements. This information can be used to assess whether the CP2-AG is the correct OEM-equivalent replacement.
The available product information confirms compatibility with Altair System 2, Neptune and Vega, but does not expose specific CP2-AG Parker or Altair part numbers. Specific cross-reference numbers should only be added after verification from the product specification.
The right coalescer panel depends on the installed OEM system, application, airflow, environmental conditions, required performance and physical dimensions. PB1P8-AG is specifically listed for Altair System 2, Neptune and Vega, while PC2-AG is listed for gas turbine, engine, HVAC and offshore wind applications.
The available product information identifies compatibility with Altair System 2, Altair Neptune and Altair Vega and other equivalent OEM air intake systems.
CP2-AG should be selected according to the environmental conditions stated in its product specification, including factors such as dust, moisture, salt, humidity, temperature and airborne contamination where applicable. The installed system and required filtration performance should be checked before selection.
Where CP2-AG is identified as Altair-compatible, Airguard Envirocare positions it as an OEM-equivalent or specification-matched replacement. Exact compatibility should be confirmed against the installed filter's part number, dimensions and required performance. The available product information identifies compatibility with Altair System 2, Altair Neptune and Altair Vega and other equivalent OEM air intake systems.
Yes. Airguard Envirocare can provide available technical information for CP2-AG, including technical datasheets, technical drawings and other relevant information on request.
The CP2-AG manufacturing origin is the United Kingdom.
Depending on the product, order requirements and delivery location, CP2-AG can be delivered in approximately 2 to 7 working weeks.
Use of an alternative filter should not be described as automatically voiding a gas turbine warranty. Warranty terms are set by the turbine OEM and the applicable contract, so customers should confirm the requirements with the OEM or operator before installation. Where this product is used as an OEM-equivalent replacement, its dimensions and performance specifications should be verified for the specific installation.
Yes. Airguard Envirocare offers a 12-month manufacturer's warranty for CP2-AG.
