Coalescer Panel Filters
Cross-references to Altair part number PC1/PAM00005-129
Airguard Envirocare PC1-AG i an OEM-equivalent coale cer panel filter engineered for ga turbine ventilation, die el and ga engine intake, HVAC.

Brand | Airguard Envirocare |
|---|---|
Flow Rate | Up to 9 m/s face velocity (1,771 FPM) |
Division | Filtration |
Efficiency | G3 |
Industry | Oil & Gas, Power Gen, Marine, Wind, HVAC |
Temperature | n/a |
Application | Offshore, Marine, Land-based |
Height | Standard and non-standard, to holding frame |
Technology | Coalescing and Mechanical Filtration (3-stage vane/coalescer/vane) |
Width | Standard and non-standard, to holding frame |
Product Type | Filter Panel |
Depth | n/a |
Product Style | Corrugated Coalescer Panel, Cleanable |
OD | n/a |
Media | Synthetic Media Core, between Stainless Steel Wire Mesh |
ID | n/a |
Construction | Stainless Steel 304L / 316L channel frame and mesh |
Weight | 2.5 KG or 5 lb |
Classification | G3 (EN 779:2002); 80% gravimetric arrestance |
Bespoke | Available |
Product
PC1 – AG
Altair System
Gas Turbine Manufacturers
Environment
Industrial Sector
The PC1-AG is an OEM-equivalent coalescer panel filter engineered to protect gas turbines, engines, and offshore wind turbine air intakes from moisture, salt mist, and fine liquid aerosols. It is a direct replacement for the Premaburg PC1 system, offering the same form, fit and performance as the original while providing a cost-effective alternative with fast supply and reliable build quality.
The PC1-AG combines a synthetic coalescing media core with stainless-steel mesh and a 304L or 316L stainless-steel frame for added strength and corrosion resistance. 316L is better suited to offshore, coastal, and marine environments with ongoing salt exposure, while 304L fits less aggressive onshore and inland sites. Both versions are cleanable, allowing the panel to be washed and reused rather than replaced after each service cycle.
Share part number/spec, dimensions, airflow and efficiency, and our team will respond within 24 hours.
From purchase order to delivery on site. Every PC1–AG is built, checked and shipped by our own team.
Common questions about PC1–AG.
The PC1-AG is suitable for onshore, coastal, offshore and marine environments, with 316L stainless steel recommended for sites with continuous salt exposure.
The PC1-AG helps remove moisture, salt mist and fine liquid aerosols from incoming air, helping protect gas turbines, engines and other intake equipment.
The PC1-AG is available with 304L or 316L stainless-steel frames in standard or custom sizes, with sealing gaskets and integral clips supplied for installation.
The PC1-AG is an OEM-equivalent coalescer panel filter designed for gas turbine ventilation, diesel and gas engine intake, industrial HVAC and offshore wind turbine air intake systems.
Yes. Airguard Envirocare lists the PC1-AG for diesel and gas engine air intake applications, where the filter can be matched to the required airflow and existing installation.
Yes. The PC1-AG is listed for offshore wind turbine air intake systems, alongside gas turbine and industrial HVAC applications.
The currently available product source confirms the PC1-AG's application range but does not expose a verified Parker Hannifin or Altair® part number that should be published as a direct cross-reference. Existing OEM part numbers can be submitted for specification matching.
Provide the current filter part number, dimensions, depth, airflow, efficiency, and application details. A drawing or photograph of the existing filter can also help confirm the correct replacement configuration.
The PC1-AG and PB1P8-AG are both coalescer panel filters, but the PB1P8-AG is specifically listed as compatible with Altair System 2, Neptune, and Vega. The correct choice depends on your installed system and filter specification.
PC1-AG should be selected according to the environmental conditions stated in its product specification, including factors such as dust, moisture, salt, humidity, temperature, and airborne contamination where applicable. The installed system and required filtration performance should be checked before selection.
Where PC1-AG is identified as Altair-compatible, Airguard Envirocare positions it as an OEM-equivalent or specification-matched replacement. Exact compatibility should be confirmed against the installed filter's part number, dimensions and required performance. The available product information lists gas turbine, diesel and gas engine, HVAC and offshore wind applications.
Yes. Airguard Envirocare can provide available technical information for PC1-AG, including technical datasheets, technical drawings and other relevant information on request.
The PC1-AG manufacturing origin is the United Kingdom.
Depending on the product, order requirements and delivery location, PC1-AG can be delivered in approximately 2 to 7 working weeks.
Use of an alternative filter should not be described as automatically voiding a gas turbine warranty. Warranty terms are set by the turbine OEM and the applicable contract, so customers should confirm the requirements with the OEM or operator before installation. Where this product is used as an OEM-equivalent replacement, its dimensions and performance specifications should be verified for the specific installation.
Yes. Airguard Envirocare offers a 12-month manufacturer's warranty for PC1-AG.