+44 (0) 7777 100207sales@airguardenvirocare.com
Cross-references to Altair part number HV2/001250F
Airguard Envirocare HV2-AG i an Altair-equivalent high-efficiency pocket filter compatible with Altair Sy tem 2, Altair Neptune and Altair Vega y tem .
Brand
Airguard Envirocare
Flow Rate
1,950 m³/h at 1.5 m/s to 11,500 m³/h at 9 m/s (597 × 597 face)
Division
Filtration
Efficiency
99.98% at 5 µm (3 m/s); 99.40% at 3 µm; 96.30% at 2 µm
Industry
Oil & Gas, Power Gen, Marine
Temperature
80 °C
Application
Offshore, Coastal, Marine
Height
597 mm
Technology
High-Velocity Mechanical Filtration (salt aerosol and sub-micron particulate)
Width
597 mm
Product Type
Pocket Filter
Depth
610 mm
Product Style
High-Efficiency Pocket Filter, 3-stage pockets
OD
n/a
Media
Filter Net + High-Loft Pre-Filter Mat + Needlefelt Non-Woven, 100% silicone-free
ID
n/a
Construction
Stainless Steel Header Frame (22 mm)
Weight
2.5 KG or 5 lb
Classification
n/a
Bespoke
Available
Product
HV2 – AG
Altair Systems
Altair Part Numbers
Gas Turbine Manufacturers
Environment
Industrial Sector
The HV2-AG is an OEM-equivalent high-efficiency pocket filter for gas turbine air intake systems, designed for offshore and coastal environments with salt aerosols, fine particles and humidity. Its staged pocket design provides high dust-holding capacity, controlled pressure loss and cleanable performance, with standard and non-standard sizes available as an Altair replacement filter.
Each HV2-AG pocket uses three filtration stages: a protective filter net, a high-loft pre-filter mat for dust loading, and a needlefelt layer for final filtration. It uses 100% silicone-free synthetic media and bonded polyester, with a 22 mm stainless-steel frame, clips and factory-fitted seals available for demanding gas turbine intake applications.
Share part number/spec, dimensions, airflow and efficiency, and our team will respond within 24 hours.
From purchase order to delivery on site. Every HV2–AG is built, checked and shipped by our own team.
Common questions about HV2–AG.
The HV2-AG is a high-efficiency pocket filter designed as an Altair-equivalent solution for gas turbine air intake and industrial filtration applications. It is suitable for demanding environments across marine, oil and gas, power generation and other industrial sectors.
The HV2-AG is compatible with Altair System 2, Altair Neptune and Altair Vega air intake systems. To ensure the correct replacement, the filter should be matched against the existing OEM part number, dimensions, airflow and efficiency requirements.
Provide your current filter part number or specification, along with dimensions, airflow and required efficiency. Airguard Envirocare can use this information to identify a compatible HV2-AG replacement filter for your gas turbine or industrial air intake system.
The HV2-AG is a high-efficiency pocket filter identified in the available product information for Altair gas turbine inlet systems. It is listed for Altair System 2, Neptune and Vega applications, with the final replacement selected according to the installed filter specification.
Yes. The HV2-AG can be supplied as a replacement-by-specification or OEM-equivalent filter when the existing part number, dimensions, pocket quantity, airflow and efficiency requirements are available.
Yes. An existing Parker®, Altair® or other manufacturer part number can be submitted together with the filter dimensions and technical specification for replacement matching. A direct cross-reference should only be claimed once compatibility has been verified.
The HV2-AG should be selected for applications supported by its verified product specification. The available information identifies it primarily for Altair System 2, Neptune and Vega gas turbine inlet systems; the existing filter specification should be checked before replacement.
For accurate matching, provide the existing filter part number, dimensions, depth, number of pockets, airflow, efficiency and application details. A technical drawing or photograph can also assist with identification.
Compare the HV2-AG, HV3-AG, HVL-AG, HVX-AG, HXA-AG, LHF-AG and T60-AG against the existing filter specification. The correct replacement should match the required efficiency, dimensions, pocket design, airflow and operating conditions rather than simply having a similar product name.
The available product information identifies Altair System 2, Neptune and Vega compatibility.
HV2-AG should be selected according to the environmental conditions stated in its product specification, including factors such as dust, moisture, salt, humidity, temperature and airborne contamination where applicable. The installed system and required filtration performance should be checked before selection.
Where HV2-AG is identified as Altair-compatible, Airguard Envirocare positions it as an OEM-equivalent or specification-matched replacement. Exact compatibility should be confirmed against the installed filter's part number, dimensions and required performance. The available product information identifies Altair System 2, Neptune and Vega compatibility.
Yes. Airguard Envirocare can provide available technical information for HV2-AG, including technical datasheets, technical drawings and other relevant information on request.
The stated manufacturing origin is the United Kingdom.
Depending on the product, order requirements and delivery location, HV2-AG can be delivered in approximately 2 to 7 working weeks.
Use of an alternative filter should not be described as automatically voiding a gas turbine warranty. Warranty terms are set by the turbine OEM and the applicable contract, so customers should confirm the requirements with the OEM or operator before installation. Where this product is used as an OEM-equivalent replacement, its dimensions and performance specifications should be verified for the specific installation.
Yes. Airguard Envirocare offers a 12-month manufacturer's warranty for HV2-AG
